VARIO Box Linerless
Linerless desktop printer for shipping and pallet labels
Field of application: stationary printing of 4-inch and 6-inch linerless labels in logistics, shipping, warehousing, retail and production.
Field of application: stationary printing of 4-inch and 6-inch linerless labels in logistics, shipping, warehousing, retail and production.
Highlights
- Freely adjustable paper width from 80 to 152 mm
- Adhesive-repellent roller and coated cutter blade
- Maintenance-free Linerless presenter
- Industrial-grade metal housing
- Integrated power supply
- Roll holder for around 200 meters of material
- Printing speed up to 200 mm/s
Your advantages
- Ready-to-use desktop solution, no installation required
- Suitable for delivery, shipping and pallet labels
- Long printing intervals thanks to large roll capacity
- Reliable processing of self-adhesive media
- Controlled label presentation
- Housing and design can be customized to customer specifications
Technical data
| GPT-18765-LL | GPT-18745-LL | |
|---|---|---|
| Paper loading | Easy Paper Loading | |
| Printing method | Direct thermal printing | |
| Resolution | 8 dots/mm (203 dpi), 1152 dots/line | 12 dots/mm (300 dpi), 1280 dots/line |
| Printing speed | max. 200 mm/s | max. 250 mm/s |
| Paper width | 80 – 152 mm | 80 – 114 mm |
| Print width | 144 mm | 108 mm |
| Paper thickness | 70 – 120 µm | |
| Paper roll diameter | max. 180 mm | |
| Operating voltage | 80 – 264 VAC | 47 – 63 Hz | |
| Current consumption (printing) | 2.1 A | 230 VAC or 4.2 A | 115 VAC (typ.) Fuse: 4.0 AT |
|
| Possible interfaces | USB 2.0 FS | |
| Fonts | 11 fonts, expandable, UTF-capable (optional: Unicode) | |
| Barcode | EAN8, EAN13, UPCA, Code39, 2of5int, Code128, QR Code | |
| MTBF*) | 100 km | 500,000 cuts (depending on the paper) | |
| Dimensions (W x H x D) | 228 x 199 x 308 mm | |
| Weight (without paper roll) | approx. 6,050 g | |
| Housing | Steel and recycled PS plastic | |
| Ambient temperature**) | -10°C – +60°C with specified paper -10°C – +30°C, due to the linerless paper specification with hotmelt adhesive -10°C – +60°C, due to the linerless paper specification with UV-hotmelt or acrylate adhesive |
|
| Humidity | 20 – 80 % relative humidity, without condensation | |
| Storage conditions | -20°C – +70°C at 10 – 90 % relative humidity, without condensation | |
Troubleshooting
Paper comes out but stays blank
The thermal paper is loaded the wrong way round — only one side can be printed. Load the paper so that the heat-sensitive side faces the print head (usually the outside of the roll).
Test: quickly run the tip of your fingernail over the paper with some pressure — the heat-sensitive side turns black from the friction heat.
Test: quickly run the tip of your fingernail over the paper with some pressure — the heat-sensitive side turns black from the friction heat.
Print faint, streaky or patchy
1) Clean the printhead.
2) Only use dry paper — damp paper prints faintly.
3) Use only specified thermal paper (specification TI-DE-0606).
2) Only use dry paper — damp paper prints faintly.
3) Use only specified thermal paper (specification TI-DE-0606).
Printer prints only a few dots | characters — or stops
The cause is almost always the power supply: thermal printers draw high peak currents while printing. Size the power supply adequately, use short supply lines with sufficient cross-section, and check the connectors for contact resistance.
Typical accompanying symptoms: the status LED goes out when printing starts; paper feed works, but the self-test does not.
Typical accompanying symptoms: the status LED goes out when printing starts; paper feed works, but the self-test does not.
Paper wraps around the platen roller
Two possible causes:
1) The paper sat in an unfavorable position for a long time (e.g. when the printer was not used for a while). Carefully free the paper, reload it and make a test print.
2) If it still wraps around the roller after that, the platen roller is worn and must be replaced.
For linerless printers, also only use specified linerless paper.
1) The paper sat in an unfavorable position for a long time (e.g. when the printer was not used for a while). Carefully free the paper, reload it and make a test print.
2) If it still wraps around the roller after that, the platen roller is worn and must be replaced.
For linerless printers, also only use specified linerless paper.
USB: printout stops or keeps repeating
Check the COM port setting: set up the virtual COM port according to the installation instructions. In addition, disable the "end of job" action in the Windows driver.
Problem not solved?
We'll take care of it.