Papierausgabe fest im Griff:

New GeBE Outdoor Printer with protective Presenter Unit for 82 mm paper width

Germering, 14th December 2017.

GeBE Elektronik und Feinwerktechnik GmbH in Germering, Germany, now introduces its new Outdoor Thermal Printer GeBE-COMPACT Plus as a 3″ printer with presenter for 80 to 82 mm wide and 70 to 100 μm thick papers.

Usually outdoor printers have to withstand a lot of different influences and they are always at risk do get damaged by vandalism. Therefore, GeBE has focused on the highest possible working reliability when developing this printer. The result is its particularly high resistance to negative environmental influences such as extremely high or low temperatures or changing humidity as well as the reliable assurance of the entire printing process and of the ticket issue itself. Thus, incorrect handling by users or deliberate action by vandals is countered: The highly complex print management monitors the processing of each print job via blackmark control, while the comfortable presenter unit has a firm grip on every single printout right up to the final paper output. The printed paper leaves the pre-assembled presenter unit only when the printing process is complete and the paper is fully cut off. This prevents damage to the internal mechanics due to premature or too tight pulling of the printout. In addition, the presenter reliably monitors not pulled printouts with a paper retract function. Those are transported back into the housing interior after a specified time. Customer-specific adaptations are realised by GeBE from smaller series on.

Inside as well as outside – print jobs done excellently

„There are currently more than 20,000 of the GeBE-COMPACT Plus Outdoor thermal printers in automatons in the field. According to experience, they are extremely stable and can nearly not be influenced by extreme conditions“, GeBE Sales Manager Michael Buchmüller explaines. To obtain ideal printing results the thermal paper is selected according to the conditions indoors or outdoors. Then this printer does its job excellently within an extremely wide temperature range of -20° C to +70° C.

The thermal printer manufacturer GeBE with its great experience from customer-specific adaptations is a reliable partner with regard to special requirements for printers as well as for thermal papers. The company has been in business for over 50 years and has been acting as a recognised partner of the industry for data input and output solutions for more than 30 years.

GeBE Elektronik and Feinwerktechnik GmbH exhibits from 6 to 8 March 2018 at IT-TRANS in Karlsruhe, dm-arena, booth A0.