PI 116 – February 2013 – Installation artist uses four times more paper
Available only in German language
Germering, February 2013.
The lightweight Mini MULDE from GeBE Elektronik und Feinwerktechnik GmbH is a proven mini thermal printer for mobile applications. The Mini - MULDE 60, a variant of this model, is specifically designed to print continuously in stationary applications for longer periods of time. To accommodate this, the paper roll holder has been significantly enlarged. It holds paper rolls with diameters up to 60 mm, thus providing up to four times more paper. This corresponds to approximately 44 m of paper per piece, printable without replacing the paper. The service intervals are extended, and costs are reduced.
The printer is installed externally. This is always quick and clean, e.g., if desired with the help of the appropriate aluminum front frame. An appealing design, particularly small dimensions, and its Easyloading technology for easy paper replacement further distinguish this small built-in printer. GeBE already implements customer requests in terms of hardware and software for smaller series. High flexibility is ensured through production in Germany. This applies to the entire extensive product range for data input and output.
Available at www.gebe.net and from 26 to 28 February 2013 at Embedded World in Nuremberg, in Hall 1, Stand 1-372
Larger paper roll, less service required, minimal space requirement
When operating a thermal printer in a stationary setting, the prerequisite is that as much as possible should be printed in one piece. In this context, its overall weight plays a rather subordinate role; the space required and the minimum of service work required, on the other hand, are very significant.
For these requirements, the slightly larger housing variant of the GeBE Mini MULDE-60 was developed. The compact GeBE printer measures a total of just 76.8 x 111.4 x 72.0 mm. It requires only 58.2 mm of installation depth, barely more than the width of a check card. A simple cutout in a panel, front panel or terminal housing is sufficient for installation. Screw mounting from the outside ensures that in the event of service, the component can be easily replaced within a short time. The GeBE Mini MULDE-60 for stationary use is the perfect counterpart to the long-established MINI MULDE with a particularly small paper roll for portable operation.
Clever paper exchange technology, intelligent controller technology
The GeBE Mini MULDE-60 printer works with Easyloading technology, which makes changing the paper a breeze. The housing mechanism is designed so that the same controller boards can be used as in the Mini MULDE. This means that the same functions are also available in the print control system, such as the various interfaces (e.g., RS232, USB, infrared, or Bluetooth). The advanced power management and operation from higher operating voltages via the built-in DC/DC converter are other popular features of this thermal printer series.
Developments according to customer requirements at GeBE
For its OEM customers, GeBE develops and manufactures its own housing colors based on a corresponding quantity; custom-designed foils on the control console; and always custom-specific adjustments in hardware and software. In doing so, GeBE draws on its long-standing expertise in cost-effective controller concepts, country-specific character sets, and customizable power management.