Precise from the first to the last ticket
available only in German language
Published in: Elektronik Informationen, AT Fachverlag, issue 04/2013
Precise from the first to the last ticket
Self-checkout is becoming increasingly important in our daily lives. Tickets and admission or access cards are increasingly being issued by staff at the counter rather than manually. Instead, customers pull them from vending machines themselves. The increasing number of self-checkout machines also requires new generations of device components to meet their requirements.
For the classic in-line printer this is a new challenge, because such prints have traditionally been done by large specialized desktop devices.
For the majority of thermal printers on the market, it remains quite „simple“ to perform their tasks. The connected computer sends the print data, text or graphics, sequentially to the printer. The printer then prints them one after another onto the continuous paper. When the data is finished, it may be trimmed if necessary. That is all there is to it.
It becomes more interesting and more difficult when you need to print and cut on exactly defined positions. This is the case, for example, with event tickets or labels. If this is required, the printer must of course know where the print head is located on the „form“.
To achieve this, position markers are usually used. These are either punched out as holes or printed directly onto the paper roll during production. Once a sensor has been installed to detect the position marker at the correct location, operating the printer is not difficult to see at first glance. Ultimately, all that is required is to locate the mark once the printing is complete and position it there – that’s it.
If it were that simple… To explain the problem, take a roll of label paper as an example:
20 mm high labels are separated from each other by a 6 mm gap (ridge). A positioning hole is punched into the gap. Even if you use an extremely compact printer, the brand sensor is positioned at least 15 mm in front of the print head.
If you wanted to search for the brand on one of these labels after the print job was completed, for example, half of the label would be unprintable.
It becomes clear: the process becomes significantly more complicated.
A professional printer is expected to be able to print tickets completely, including every single ticket. This applies to both the first and the last ticket in a roll or stack.
To ensure this, the printer must not first search for the position mark after the print is complete. This must be done continuously during the paper movement.
This means that the mark does not have to be placed at a specific point on the ticket; it can be placed in any other location, provided that the printer is also told to place the mark at the distance between the mark and the form’s start.
Synchronisation marks are essential, among other reasons, because without them errors that would otherwise continue to propagate through tolerances in the printer drive or positioning errors caused by external influences (e.g., paper jams) would remain uncorrected permanently.
In many cases, ticket or ticket-card documents can be thought of as „blank banknotes“. This means that they already have no printing on them and therefore represent value in their own right. In the event of loss, the authenticity must usually be proven by the operator or the person responsible for the service at the vending machine. Missing tickets therefore usually lead to unpleasant consequences.
That means that, especially in applications involving monetary payments, it is absolutely not desirable to „waste“ tickets. This applies especially to the first and last ticket of a fan fold.
Standard printers are generally unable to print the first and last ticket correctly. This means that the first ticket is „lost“ during paper loading, and the last one is often not printed completely, because the exact synchronization, as described above, is not provided here.
Specialty printers are equipped to meet these requirements.
If the printer has „found“ a mark during the printing of a ticket, it checks the current position relative to the previously found mark position after the printing is complete and moves the printhead by the difference to the next ticket start (ToF).
If necessary, it can now be transported to the cutting position, cut, and returned. The position counter is then reset. The printer is ready for the next ticket.
Some printers are also able to combine several tickets (position marks) into a group, thus creating a single ticket. This makes it possible to create tickets of different sizes within the grid.
Like the brand sensor, the mandatory paper-wrapping sensor is located in front of the printing position.
„When this detects the end of the paper, the printer usually stops to protect the printhead, which must never be allowed to “print„ on the drive roller.
The last approximately 15 mm of the area to be printed would therefore not be printable again; the last ticket would thus be „destroyed“. Furthermore, the printer wants to get rid of the remaining data from the last edited ticket to the next ticket that is then inserted again. This is of course not desired.
Thanks to the position counter, the ticket printer knows exactly where it is located. In the case of the last ticket, it suppresses the stopping paper by a defined length until the end of the ticket. It feeds the ticket out, then reports „papering“ and finally waits for new tickets to be inserted.
The logical paper folding is therefore virtually „shifted“.
When new printing material is inserted, the printer starts a paper auto-load process. Normally, this would result in the loss of the first ticket.
However, a ticket printer looks for the first mark. If this is found, an automatic measurement of the mark spacing can be performed if desired. After that, it is positioned at the beginning of the first ticket form. In this way, no ticket is lost.
This brief insight into the workings of a ticket or label printer reveals the complexity faced by manufacturers of specialized thermal printers for OEMs. (The printing capabilities themselves are left out of the equation here.)
The GeBE COMPACT Plus (Figure 2) is derived from the ticket printers of the series (GeBE-PIANO Figure 3). Both are capable of processing tickets according to the procedure described above.
The GeBE COMPACT Plus is an extremely compact installation unit measuring only 113x92x50 mm. The printer is available in various versions with print resolutions of 200 or 300 dpi. The built-in cutter is, like the printer itself, capable of processing standard event tickets weighing up to 180 g/m2 paper.
Its smart Autoload even allows you to make the first ticket the last one and thus print individual tickets.
Outlook
The desire for paper tickets remains strong despite the trend towards paperless admission systems. There are several reasons for this:
You can easily take the paper ticket with you anywhere and thus remain independent, for example, regardless of the reception of the mobile phone. Tickets are also often used as a souvenir from an expensive concert and therefore have a high symbolic value…
In addition, the printing technology is proven and is quite affordable compared to alternatives.
Accordingly, there will continue to be a need for specialized installation components that create money-value outputs.